PEMANFAATAN WASTE PENGOLAHAN AIR SEBAGAI AIR UMPAN BOILER PT. NLP
DOI:
https://doi.org/10.35891/jmmt.v5i1.5025Keywords:
Morphological Diagram, Objective Tree, Sawdust, UtilizationAbstract
NLP isafurniture manufacturing company that uses three types of wood, namely mahogany, pine, and teak. Handling and processing sawdust waste is a challenge that needs to be overcome effectively so that the waste can become a product that has added value. The value-dded product in question is souvenir craft. The utilization of coarse sawdust can be mixed with epoxy resin to form composite materials, which can be used as the basic material for souvenir crafts. It is known that the strength of composite materials increases with the increasing composition of the resin in composite materials, and the character of composite materials If the composition of sawdust is higher, the resulting composite material will be opaque and lighter. Then the manufacture of composite materials will use a ratio of 1:1. Regional attributes, cultural elements, innovation in form, design, and ease of application are important factors to consider when designing a product for souvenirs. The collected data is needed to be translated into the interpretation of product requirements to be used in making the Objective Tree and Morphological Diagrams. Evaluation of alternative product designs is carried out by considering the minimum risks.
References
Aisyah, I. S., Hendaryati, H., & Kurniawati, D. (2018). Pelatihan Pemanfaatan Limbah Serbuk Kayu Dan Perca Kain Untuk Kerajinan Suvenir. Seminar Nasional Unisla.
Arif, S., Irawan, D., & Jainudin, M. (2019). Analisis sifat mekanis perbandingan campuran komposit serbuk gergaji kayu jati dengan matrik epoxy untuk material kampas rem cakram. Jurnal Technopreneur (JTech), 7(2), 58-63.
de Oliveira Júnior, J. N., Lopes, F. P. D., Simonassi, N. T., Lopera, H. A. C., Monteiro, S. N., & Vieira, C. M. F. (2023). Ecofriendly panels for building with eucalyptus sawdust and vegetal polyurethane resin: A mechanical evaluation. Case Studies in Construction Materials, 18, e01839.
Darsa, D. S., & Rizki, M. (2015, October). Karakterisasi Komposit Resin Epoksi Serbuk Kayu. In Prosiding Seminar Nasional Fisika (E-Journal) (Vol. 4, pp. SNF2015-VII).
Cross, N. (2021). Engineering design methods: strategies for product design. John Wiley & Sons.
Rofieq, M., Sudjito, S., Sugiono, S., & Herminingrum, S. (2018). Handicraft Product Design For Micro And Small Enterprise In Malang Tourism.
Susanto, B. R. (2018). Perancangan Prototype Souvenir Umbul Ponggok in Yogyakarta. Univesitas Atma Jaya Yogyakarta; 2018.
Omoniyi, T. E., & Yinusa, R. O. (2018). Development of processing equipment for Souvenir production from wood and plastics wastes. In Proceeding of 6th NSCB Biodiversity Conference Uniuyo (pp. 390-386).
