Identification Types of Waste in Panties Production at PT Indonesia Wacoal
Main Article Content
PT Indonesia Wacoal is a garment company that produces underwear with several product variations: panties. Companies must always produce good quality products by maximizing production results and high productivity. However, waste becomes an obstacle to the company's performance in carrying out its production. The potential for the emergence of waste can occur in all company activities, where PT Indonesia Wacoal experienced the same thing. This study aims to identify and analyze waste that occurs in the production process of panties. The waste is defective products, transportation, excessive movement, and waiting time. The method used in this article is seven tools: the Pareto diagram and the fishbone diagram. The identification results indicate that the waste of defective products in Wolly yarn is about 211 seconds or 64.04%. In addition, there is a long process of transferring material from QC to the finished product warehouse of around 1188 seconds or 29.73%. Furthermore, excessive movement in the sewing process for 2340 seconds or 45.14% and waste due to the waiting time for the storage process to the next process is 4320 seconds or 42.40%. The identification results show several factors causing waste such as labor, machines, methods, materials and the environment.
Anggara, A. R., Suryadhini, P. P., & Rendra, M. (2018). Perancangan perbaikan area kerja sewing untuk mengurangi waste transportation pada PT Sansan Saudaratex Jaya Garment menggunakan pendekatan lean manufacturing. E-Proceeding of Engineering, 5(3), 6849–6856.
Armawan, A. (2018). USULAN PERBAIKAN LOADING RATE DI FASILITAS AUTOMATIC LINE PACKER MENGGUNAKAN METODE SEVEN TOOLS DAN FAULT TREE ANALYSIS (FTA) (Studi Kasus: PT. Cemindo Gemilang Gresik). undergraduate thesis, UNIVERSITAS MUHAMMADIYAH GRESIK. Thesis Industrial Engineering Study Program, 1. http://eprints.umg.ac.id/id/eprint/787
Astuti, F., & Wahyudin, W. (2021). PERBAIKAN KUALITAS PADA PRODUKSI GENTONG MENGGUNAKAN METODE SEVEN TOOLS (Studi Kasus : Home Industry Bapak Ojid). Barometer, 6(1), 307–312. https://doi.org/10.35261/barometer.v6i1.4444
Ayuk, T. (2018). ANALISIS KECACATAN PRODUK MENGGUNAKAN PENDEKATAN SPC (STATISTICAL PROCESS CONTROL) DENGAN METODE SEVEN TOOLS (Studi Kasus di CV. Saraswati Batik Fajar Indah Laweyan- Surakarta) [Universitas Muhammadiyah Ponorogo]. http://eprints.umpo.ac.id/id/eprint/4070
Azizan, M. (2017). Analisis Time and Motion Study dengan Menggunakan Metode Micromotion Study dalam Meningkatkan Produktivitas UKM Aneka Karya Glass. 1(1), 1–19.
Kusbiantoro, C., & Nursanti, E. (2019). Penerapan Lean Manufacturing Untuk Mengidentifikasi Dan Menurunkan Waste (Studi Kasus CV Tanara Textile). Jurnal Teknologi Dan Manajemen Industri, 5(1), 1–7. https://doi.org/10.36040/jtmi.v5i1.251
Nuzula, W. (2019). Abstract ANALISIS WASTE PADA PROSES PRODUKSI PRODUK “HIJRA ABAYA” DENGAN METODE VALUE STREAM MAPPING (Studi Kasus Pada CV. Sogan Jaya Abadi). 1–27. https://dspace.uii.ac.id/handle/123456789/13789
Suliantoro, H., Arvianto, A., Kusumo, P. S., & Kom, S. (2012). ANALISA DAN EVALUASI PRODUKTIVITAS MELALUI PENDEKATAN THE AMERICAN PRODUCTIVITY CENTER MODEL (APC) (Studi Kasus di PT. Gratia Husada Farma). J@Ti Undip : Jurnal Teknik Industri, 1(2), 54-67–67. https://doi.org/10.12777/jati.1.2.54-67
Surijah, A. B., Prakasa, D. Y., Ahmad, F., Supriyadi, F., Sakitri, G., Alkhair, H., Setiawati, I. B., Subagyo, I. E., Haryono, L., Dewantara, M. H., & others. (2021). UMKM Sintas Pandemi: Strategi Bertahan dan Bertumbuh. Prasetiya Mulya Publishing. https://books.google.co.id/books?id=qwEwEAAAQBAJ
Suseno, & Cahyano. (2020). Analisis produktivitas melalui pengendalian kualitas material dan komponen serta produk jadi dengan pendekatan six sigma pada proyek lrt jabodebek di pt inka. 13(1), 11–19.
Syarifuddin, Syukriah, R. M. J. (2017). Analisis Produktivitas Perusahaan Dengan Menggunakan Metode Pospac Di. Seminar Nasional Teknik Industri, September, 13–14.
Wulandari, D. R., Moelyaningrum, A. D., & Hartanti, R. I. (2017). Risiko Ergonomi Dan Keluhan Muskuloskeletaldisorders Pada Pekerja Jahit (Studi Di Ud. Ilfa Jaya Konveksi Banyuwangi - Indonesia). Prosiding Seminar Nasional Dalam Rangka OSH Week, 119–131.
