Implementation of Lean Six Sigma to Reduce Work Time Waste in the Goods Transportation Department
Main Article Content
Lean Manufacturing is a manufacturing concept to seek to suppress waste or also known as waste. There are 7 wastes in Lean that need to be eliminated, which include: excessive production, inefficient material transportation, waiting time, value that has no added value, inventory, movement and defective products. Value stream mapping will be used in this study to identify waste and explore activities that have the potential to become wasteful. Opportunities for existing waste will be reduced so as not to result in waste. Research is expected to produce processes that are more efficient so as to reduce activities that do not have added value. That way it can overcome the company's problem that is often late in delivery.
Abdulai, M. N., Prah, J. K., Walker, E., & Afrifa, A. D. (2020). A fishbone analysis of the use of electronic health records (EHR) in a primary healthcare setting: the case of university of cape coast hospital. International Journal of Applied Information Systems (IJAIS), 12(33), 27-31.
Adeodu, A., Kanakana-Katumba, M. G., & Rendani, M. (2021). Implementation of Lean Six Sigma for production process optimization in a paper production company. Journal of Industrial Engineering and Management, 14(3), 661-680.
Ahmed, S. (2019). Integrating DMAIC approach of Lean Six Sigma and theory of constraints toward quality improvement in healthcare. Reviews on environmental health, 34(4), 427-434.
Cahyono, A., & Nurcahyanie, Y. D. (2023). Identification and Evaluation of Logistics Operational Risk Using the Fmea Method at PT. XZY. Aptisi Transactions on Technopreneurship (ATT), 5(1Sp), 1-10.
Fauzi, A., Mas’ud, M. I. (2019). Proses Manufaktur pada Mesin Primer dan Sekunder CV. Karunia Menggunakan Metode Linier Programming. Journal Knowledge Industrial Engineering(JKIE), 6(2), 59–65.https://doi.org/10.35891/jkie.v6i2.2055
Godina, R., Silva, B. G. R., & Espadinha-Cruz, P. (2021). A DMAIC integrated fuzzy FMEA model: a case study in the Automotive Industry. Applied sciences, 11(8), 3726.
Hanik, U., & Mas’ud, M. I. (2019). Perencanaan Inovasi Pengembangan Agrowisata Bukit Flora Dengan Pendekatan Metode Bisnis Model Kanvas. JKIE (Journal Knowledge Industrial Engineering), 6(3), 81–90.
Jamil, N., Gholami, H., Mat Saman, M. Z., Streimikiene, D., Sharif, S., & Zakuan, N. (2020). DMAIC-based approach to sustainable value stream mapping: towards a sustainable manufacturing system. Economic research-Ekonomska istraživanja, 33(1), 331-360.
Junaedi, D., Mas’ud, M. I. (2018). Penerapan Metode Forecasting dalam Perencanaan Produksi Bakpia dengan Menggunakan Software POM Guna Memenuhi Permintaan Konsumen. Journal Knowledge Industrial Engineering (JKIE), 5(3), 121–128. https://doi.org/10.35891/jkie.v5i3.2042
Kurniawan, A. (2019). Analisis brand ambassador, brand maskot, dan media iklan terhadap minat pembelian konsumen (Doctoral dissertation, UAJY).
Letchumanan, L. T., Gholami, H., Yusof, N. M., Ngadiman, N. H. A. B., Salameh, A. A., Štreimikienė, D., & Cavallaro, F. (2022). Analyzing the factors enabling green lean six sigma implementation in the industry 4.0 Era. Sustainability, 14(6), 3450.
Li, H., Díaz, H., & Soares, C. G. (2021). A failure analysis of floating offshore wind turbines using AHP-FMEA methodology. Ocean Engineering, 234, 109261.
Mas’ud, M. I., & Wahid, A. (2022). Model SMEs digital disruption management with business model canvas and integer programming. International Journal of Trends in..., 5(2), 162-168.http://ijtmer.saintispub.com/ijtmer/article/view/134%0Ahttps://ijtmer.saintispub.com/ijtmer/article/download/134/102
Mas’ud, M. I., Wahid, A., Nuriyanto, Wibowo, M. M. A., & Pusakaningwati, A. (2022). Effectivity Green Productivity Basis Triple Helix in Tofu Central Industry. Seybold Report, 17(8), 1024–1036. https://doi.org/10.5281/zenodo.7006265
McHugh, A., & Farrell, F. (2023, February). Sustaining the Effectiveness of Lean Six Sigma Implementation in a Medical Device Company. In Lean, Green and Sustainability: 8th IFIP WG 5.7 European Lean Educator Conference, ELEC 2022, Galway, Ireland, November 22–24, 2022, Proceedings (pp. 165-183). Cham: Springer International Publishing.
Nandakumar, N., Saleeshya, P. G., & Harikumar, P. (2020). Bottleneck identification and process improvement by lean six sigma DMAIC methodology. Materials Today: Proceedings, 24, 1217-1224.
Ponsiglione, A. M., Carlo, R., Giovanni, I., Orabona, G. D. A., Alfonso, S., Francesco, A., & Romano, M. (2021). A Six Sigma DMAIC methodology as a support tool for Health Technology Assessment of two antibiotics. Mathematical Biosciences and Engineering, 18(4), 3469-3490.
Rais, A. (2019). Analisis proses operasional shipping dalam pendistribusian part toyota dengan menggunakan metode lean six sigma pada pt serasi logistik indonesia sub depo bandung (Doctoral dissertation, Program Studi Teknik Industri S1 Fakultas Teknik Universitas Widyatama).
Ramani, P. V., & KSD, L. K. L. (2021). Application of lean in construction using value stream mapping. Engineering, Construction and Architectural Management, 28(1), 216-228.
Ridlo, I. A. (2017). Panduan pembuatan flowchart. Fakultas Kesehatan Masyarakat, 11(1), 1-27.
Rodriguez Delgadillo, R., Medini, K., & Wuest, T. (2022). A DMAIC framework to improve quality and sustainability in additive manufacturing—A case study. Sustainability, 14(1), 581.
Siddiqui, A. (2021). Comparing the Workplace Organization Method 5s with the 7 Wastes (Muda) in Waste and Failure Management Tool, in the Health Care Quality Management. Biomed J Sci & Tech Res, 40(1), 31825-31831.
Şişman, G. (2022). Implementing lean six sigma methodology to reduce the logistics cost: a case study in Turkey. International Journal of Lean Six Sigma, (ahead-of-print).
Sommer, A. C., & Blumenthal, E. Z. (2019). Implementation of Lean and Six Sigma principles in ophthalmology for improving quality of care and patient flow. Survey of ophthalmology, 64(5), 720-728.
Suasapha, A. H. (2020). Skala Likert Untuk Penelitian Pariwisata; Beberapa Catatan Untuk Menyusunnya Dengan Baik. Jurnal Kepariwisataan, 19(1), 29-40.
Swarnakar, V., Tiwari, A. K., & Singh, A. R. (2020). Evaluating critical failure factors for implementing sustainable lean six sigma framework in manufacturing organization: A case experience. International Journal of Lean Six Sigma, 11(6), 1069-1104.
Tampubolon, S., & Purba, H. H. (2021). Lean six sigma implementation, a systematic literature review. International Journal of Production Management and Engineering, 9(2), 125-139.
Trimarjoko, A., Hardi Purba, H., & Nindiani, A. (2020). Consistency of DMAIC phases implementation on Six Sigma method in manufacturingand service industry: a literature review. Management and Production Engineering Review.
Vaishnavi, V., & Suresh, M. (2020). Modelling of readiness factors for the implementation of Lean Six Sigma in healthcare organizations. International Journal of Lean Six Sigma.
Zala, S. H. (2022). Implementing lean six sigma methodology for automobile and allied industries to enhance quality and cost effectiveness (Doctoral dissertation, gujarat technological university ahmedabad).
