DESIGN OF WORK AID TOOLS TO IMPROVE MAN POWER WORK POSTURE USING RULA METHOD (RAPID UPPER LIMB ASSESSMENT) PT.XYZ

Arya Dika Sudiarto; Nida An  Khofiyah; Syarah Rizkia  Feriaty

doi:10.35891/jkie.v12i1.6043

Authors

Arya Dika Sudiarto a:1:{s:5:"en_US";s:25:"UNIVERSITAS PELITA BANGSA";}
Nida An Khofiyah Universitas Pelita Bangsa, Indonesia
Syarah Rizkia Feriaty

DOI:

https://doi.org/10.35891/jkie.v12i1.6043

Keywords:

Nordic Body Map (NBM), Musculoskelatal Disorders (MSDs), Rapid Upper Limb Assessment (RULA), Work Posture

Abstract

This research was conducted in the ACG-S Department with the object of observation of Man Power in the Wire Connection Soldering Stator Line 4B Process. With the aim of obtaining the value of Man Power's work posture and providing recommendations for improving work posture in the Wire Connection Soldering Process. To find out the data, the researcher used the Nordic Body Map (NBM) Questionnaire to find out subjective complaints from Man Power, then a work posture assessment was carried out using the Rapid Upper Limb Assessment (RULA) Method. The results of the Nordic Body Map (NBM) Questionnaire showed that 4 out of 6 Man Power complained of pain in the neck, back, shoulders, and waist areas, then from the results of the work posture assessment using the RULA method, a final score of 6 was obtained, which means that the Man Power's work posture position is at a high level (High) meaning that there is a high risk of Man Power getting Musculoskeletal Disorders (MSDs) and requiring posture improvement. Improvement of work posture is carried out by adding work aids, namely magnifying glasses and Poka Yoke Camera Soldering. After improving posture by adding work aids, the results of the work posture assessment using the RULA method obtained a final score of 3, which means that the Man Power work posture position after adding work aids is at a moderate level, which means that there is a moderate risk of Man Power getting Musculoskeletal Disorders (MSDs) and does not require action to improve body posture.

Downloads

Download data is not yet available.

References

Ahmad, N. P., Hidayat, R., & Hamdani, R. (2020). Analisis Postur Kerja Dengan Metode Rula Pada Operator Las Di Bengkel Las Sumber Jaya Bekasi, Jawa Barat. Bulletin of Applied Industrial Engineering Theory, 2(1), 59–63.

BENI SPRIANTO ZAI. (2023). Perancangan Alat Bantu Pemecah Biji Kemiri Usaha Dagang Sianturi Dengan Metode Rula.

Bilal, M. (2022). Postur Tubuh Operator Bagian Packaging Dan Proses Pengelasan Dengan Menggunakan Metode Nordic Body Map, Serta Rula Dan Reba Di PT. Kewalram Bandung. Fakultas Teknik Dan Ilmu Komputer, 1, 5–24.

Djollong, A. F. (2014). Teknik Pelaksanaan Penelitian Kuantitatif (Technique of Quantiative Research). Istiqra’, 2(1), 86–100.

E, S. (2018). Analisa Postur Kerja Dengan Metode RULA di UKM Safira Collection Yogyakarta. 9–32.

Mahawati, E., Yuniwati, I., Ferinia, R., Rahayu, P. P., Fani, T., Sari, A. P., Setijaningsih, R. A., Fitriyatinur, Q., Sesilia, A. P., Mayasari, I., Dewi, I. K., & Bahri, S. (2021). Analisis Beban Kerja Dan Produktivitas Kerja. In Yayasan Kita Menulis. https://repository.unai.edu/id/eprint/285/1/2021-2022 Ganjil Analisis Beban Kerja Full_compressed.pdf

Pramana, A. N., Kurniawan, B., & Ekawati. (2021). Analisis Postur Kerja Dengan Menggunakan Metode Rapid Upper Limb Assessment (Rula) pada Pekerja di Laundry X Kota Semarang. Indonesian Journal of Health Community, 2(2), 57–66. http://e-journal.ivet.ac.id/index.php/ijheco

Ramdhani, D., & Zalynda, P. M. (2018). , penilaian terhadap lengan bawah ( Lower Arm ) membentuk sudut sekitar 60. Institutional Respositories and Scientific Journals, 1–13. Dani Ramdhani1), IR.Putri Mety Zalynda, MT2)

Ridwan Malik, M., Alwi, M., Wolok, E., & Rasyid, A. (2021). Analisis Postur Kerja Pada Karyawan Menggunakan Metode Rula ( Studi kasus Area Control Room , Joint Operating Body. Integrasi Jurnal Ilmiah Teknik Industri, 1(1), 22–29. file:///C:/Users/PersonaL/Downloads/10230-20578-1-PB.pdf

Tiara Catur Anggraini, D., Herwanto, D., Estu Nugroho, R., Ronggowaluyo, J. H., Timur, T., & Barat, J. (2022). Analisis Postur Kerja Karyawan Menggunakan Metode RULA. Jurnal Sains, Teknologi Dan Industri, 20(1), 147–155.

Wijaya, I. S. A., & Muhsin, A. (2018). Analisa Postur Kerja Dengan Metode Rapid Upper Limb Assessment (Rula) Pada Oparator Mesin Extruder Di Stasiun Kerja Extruding Pada Pt Xyz. Opsi, 11(1), 49. https://doi.org/10.31315/opsi.v11i1.2200

Yuamita, F., & Sary, R. A. (2017). Usulan Perancangan Alat Bantu Untuk Meminimalisir Kelelahan Fisik dan Mental Pekerja. Jurnal Ilmiah Teknik Industri, 15(2), 127. https://doi.org/10.23917/jiti.v15i2.2424