PENGENDALIAN KUALITAS PRODUK GALON AIR MINERAL 19 L DENGAN PENDEKATAN SIX SIGMA
Main Article Content
The problem faced by the company is the lack of product quality control that is used to reduce the number of defective products during the production process. Six sigma is a statistical-based quality improvement method, where the principle of this method is continuous improvement using statistical tools and problem solving tools. In this study, researchers applied the Six Sigma method which can be considered by the company as a product quality control method. In the measure stage through the calculation of the average product mismatch, it is known that the products that experience the largest defect rate of the company are black dirty, with an average value of 0.0285 and a sigma value of 3.2. In the next stage, the analyze phase through calculations using pareto diagrams, it is known that the dominant type of product defect is black dirty (65%) and the rest is dirty die head (2%) anamdel mouth (1%) bottom folded (1%). At the same stage through calculations using cause and effect diagrams, it is known that the factors that sequentially cause the product defects are 5 factors, namely human, material, method, machine and environment. The proposed improvements made by researchers into consideration in making improvements that can be useful to reduce the number of defective products or reject on gallon products.
Amrina, E., & Fajrah, N. (2015). Analisis Ketidaksesuaian Produk Air Minum dalam Kemasan di PT Amanah Insanillahia. Jurnal Optimasi Sistem Industri, 14(1), 99–115.
Bachtiar, E. (2012). Perancangan Sistem Informasi Akuntansi dengan Menggunakan Database Karyawan untuk Meningkatkan Keakuratan dalam melakukan Perhitungan Penggajian Pada PT. DIS. Jurnal Ilmiah Mahasiswa Akuntansi, 1(1), 86–89.
Diatin, I., Fannayanti, N., & Lesmana, Z. E. (2006). Analisis Biaya Kegagalan Internal Pengendalian Mutu Produk Udang Beku (Frozen Shrimp) Pada PT Def, Muara Baru, Jakarta.
Hartoyo, F., Yudhistira, Y., Chandra, A., & Chie, H. H. (2013). Penerapan metode DMAIC dalam peningkatan acceptance rate untuk ukuran panjang produk bushing. ComTech: Computer, Mathematics and Engineering Applications, 4(1), 381–393.
Muhaemin, A. (2012). Analisis Pengendalian Kualitas Produk dengan Metode SIX Sigma pada Harian Tribun Timur. Skripsi. Makasar: Fakultas Ekonomi dan Bisnis Universitas Hasanudin.
Putra, I. R. (2016). PERBAIKAN KUALITAS PRODUK DENGAN KONSEP LEAN SIX SIGMA UNTUK MENINGKATKAN PRODUKTIVITAS PERUSAHAAN (Studi Kasus pada Divisi Billet Steel Plant di PT Krakatau Steel (Persero) Tbk.) [PhD Thesis]. Universitas Widyatama.
Wibisono, Y. Y., & Suteja, T. (2013). Implementasi Metode DMAIC-Six Sigma dalam Perbaikan Mutu di Industri Kecil Menengah: Studi Kasus Perbaikan Mutu Produk Spring Adjuster di PT. X.
Windarti, T. (2014). Pengendalian kualitas untuk meminimasi produk cacat pada proses produksi besi beton. J@ Ti Undip: Jurnal Teknik Industri, 9(3), 173–180.
Wiyono, L. V. (2016). PENGAWASAN MUTU SEASONING PADA MI INSTAN DI PT INDOFOOD CBP SUKSES MAKMUR TBK. DIVISI NOODLE SEMARANG.
