Analisis tingkat kontribusi teknologi pada produksi gula di pabrik gula Gempolkrep Mojokerto
Analysis of technology contribution rate to sugar production in Gempolkrep Mojokerto sugar factory
DOI:
https://doi.org/10.35891/tp.v16i2.6226Keywords:
Gempolkrep sugar factory, technology contribution, improvement priority, technometrics, AHPAbstract
The sugar industry in Indonesia plays an important role in supporting national food security. Sugar factories as one of the vital sectors not only produce sugar for domestic consumption but also contribute to the local economy and the agricultural sector, especially sugar cane. Gempolkrep Sugar Factory, which has been operating since 1849, is one of the sugar factories that faces challenges in terms of increasing production yields, as seen from the stagnation of yields around 8% in the last 6 years. This study aims to analyse the condition of the sugar production process, identify the contribution of technology to production, and determine the priority of improvements needed at Gempolkrep Sugar Factory. The research methods used are descriptive method to describe the production process, technometric method to assess technology contribution, and AHP (Analytical Hierarchy Process) method to determine improvement priorities. The results of this study show that the sugar production process at Gempolkrep Sugar Factory consists of 7 stages, with the technology applied classified as semi-modern with a TCC value of 0.675. The main improvement priority that must be done is machine modernisation with an AHP score of 0.473 which is focused on improving the IoT-based monitoring system with an AHP score of 0.460. The conclusion from these results is that implementing improvements based on existing priorities will help increase production yields and produce more consistent sugar products.
References
Aditama, R. A. (2020). Pengantar manajemen. Malang: AE Publishing.
Agustin, S. E. (2022). The influence of sugar consumption and international sugar prices toward the volume of sugar import in Indonesia. JOBS (Jurnal Of Business Studies), 7(1), 1–14.
Akbar, M. Z. S., & Riady, S. R. (2022). Sistem akuisisi dan monitoring performa mesin produksi berbasis internet of things (IoT) dengan metode logging data. Jurnal Mahasiswa Bina Insani, 7(1), 55–64. https://doi.org/10.21776/jrm.v3i3.168
Alkadri, M. E., Peters, M. N., Katz, M. J., & White, C. J. (2013). State of the art paper: therapeutic hypothermia in out of hospital cardiac arrest survivors. Catheterization and Cardiovascular Interventions, 82(4), E482–E490.
Amalia, H. A., Suacana, I. W. G., Khairunnisa, S., Simarmata, N., Chaidir, I. H. J., MM, M. Ik., MAP, M. P., Sudiyarti, M. S., Tariana, I. W. A., & Noviyanti Tue, S. I. P. (2025). Pengantar perilaku organisasi. Jakarta: CV Rey Media Grafika.
Anaam, E. A., Haw, S.-C., & Naveen, P. (2022). Applied fuzzy and analytic hierarchy process in hybrid recommendation approaches for e-crm. JOIV: International Journal on Informatics Visualization, 6(2–2), 553–560. http://doi.org/10.30630/joiv.6.2-2.1043
Baviga, R., Irvianti, L. S. D., Napisah, S., Adhikara, C. T., & Boari, Y. (2023). Manajemen umkm: mengelola sdm untuk meningkatkan produktifitas umkm di Indonesia. Jambi: PT. Sonpedia Publishing Indonesia.
Chaerudin, A., Rani, I. H., & Alicia, V. (2020). Sumber daya manusia: pilar utama kegiatan operasional organisasi. Sukabumi: CV Jejak (Jejak Publisher).
Ghozali, M. B., Hidayat, H., & Negoro, Y. P. (2024). Analisis risiko pada proses produksi dengan menerapkan metode house of risk, ahp dan pendekatan scor pada pt xyz. G-Tech: Jurnal Teknologi Terapan, 8(4), 2365–2378.
Hanoum, F. C., Rizan, M., Susita, D., Nurjanah, S., Makhrus, I., Prabowo, H., Violinda, Q., Ramadian, A., Ernawati, E., & Kusumaningrum, R. (2024). Manajemen sumber daya manusia. Bandung: Penerbit Widina.
Herdiansah, A., Borman, R. I., & Maylinda, S. (2021). Sistem informasi monitoring dan reporting quality control proses laminating berbasis web framework laravel. Jurnal Tekno Kompak, 15(2), 13–24. https://doi.org/10.33365/jtk.v15i2.1091
Hidyantari, E., Hardiano, H., & Rahmanto, A. (2024). Evaluasi kebijakan one day service (ods) dalam meningkatkan pelayanan perizinan di kota Surabaya. Indonesian Research Journal on Education, 4(4), 2030–2040. https://doi.org/10.31004/irje.v4i4.1461
Mantik, H. (2022). Revolusi Industri 4.0: Internet of things, implementasi pada berbagai sektor berbasis teknologi informasi (bagian 1). JSI (Jurnal Sistem Informasi) Universitas Suryadarma, 9(2), 41–48. https://doi.org/10.35968/jsi.v9i2.919
Nainggolan, H., Nuraini, R., Sepriano, S., Aryasa, I. W. T., Meilin, A., Adhicandra, I., Putri, E., Andiyan, A., & Prayitno, H. (2023). Green technology innovation: transformasi teknologi ramah lingkungan berbagai sektor. Jambi: PT. Sonpedia Publishing Indonesia.
Pada, A. T., Malik, A. J., & Amelia, L. H. (2021). Pembelajaran dari kaizen event di masa pandemi covid 19: studi kasus pada toyota kalla, Indonesia. JMBI UNSRAT (Jurnal Ilmiah Manajemen Bisnis Dan Inovasi Universitas Sam Ratulangi)., 8(3). https://doi.org/10.35794/jmbi.v8i3.36021
Pramudita, R., Ramadhan, M. A. P., Ashari, M. R., Nafisa, R. A., & Rahmawati, D. N. (2024). Analisis dampak otomasi industri terhadap efisiensi operasional dan optimasi konsumsi energi. Jurnal Ilmiah Teknologi Infomasi Terapan, 11(1). https://doi.org/10.33197/jitter.vol11.iss1.2024.2411
R. Yanthi, A. Basith, J. M. (2018). Analisis kontribusi komponen teknologi pada perusahaan jasa kereta api barang dengan pendekatan model teknometrik. Jurnal Manajemen Teknologi, 17(3):197-215. https://doi.org/10.12695/jmt.2018.17.3.3
Rahayu, S., & Al Hadi, K. (2023). Pelatihan pemanfaatan artificial intelligence (ai) untuk keefektifan presentasi yang menarik dan komunikatif. Jurnal Pengabdian Magister Pendidikan IPA, 6(4), 1268–1271. https://doi.org/10.29303/jpmpi.v6i4.6601
Rahmad, R., Pratikto, P., & Wahyudi, S. (2012). Penerapan overall equipment effectiveness (oee) dalam implementasi total productive maintenance (tpm) (studi kasus di pabrik gula pt xyz). Jurnal Rekayasa Mesin, 3(3), 431–437.
Robinson, S. (2014). Simulation: the practice of model development and use. London: Bloomsbury Publishing.
Rohana, T. L. (2025). Penerapan metode peramalan menggunakan fuzzy arma: studi kasus: jumlah wisatawan mancanegara yang datang ke Jawa Barat. MATHunesa: Jurnal Ilmiah Matematika, 13(1), 13–24.
Rusman, A. D. P., & Suwardoyo, U. (2022). Penerapan sistem informasi berbasis it pengolahan data rekam medis untuk peningkatan pelayanan di rumah sakit. Pekalongan: Penerbit Nem.
Saaty, T. L. (2008). Decision making with the analytic hierarchy process. International Journal of Services Sciences, 1(1), 83–98.
Sandi, O. P. (2022). Analisis integrasi pasar dan transmisi harga gula tebu di Provinsi Lampung dengan pasar internasional. Lampung: Universitas Lampung.
Saragih, J. P. (2023). Dinamika sistem produksi dan perspektif kebijakan revitalisasi industri menuju swasembada gula. Kajian, 22(4), 281–300.
Savitri, A. (2019). Revolusi industri 4.0: mengubah tantangan menjadi peluang di era disrupsi 4.0. Yogyakarta: Penerbit Genesis.
Sinaga, I. A. (2023). Manajemen proyek sistem informasi. Deli: UIN Sumatera Utara.
Sitinjak, F. R., & Silalahi, F. T. R. (2023). Analisis strategi pemeliharaan preventive maintenance excavator menggunakan pendekatan analytical hierarchy process (ahp) dan analisis sensitivitas. Journal of Integrated System, 6(2), 226–242.
Sudipa, I. G. I., Kharisma, L. P. I., Waas, D. V., Sari, F., Sutoyo, M. N., Rusliyadi, M., Setiawan, I., Martaseli, E., Sandhiyasa, I. M. S., & Winarno, E. (2023). Penerapan decision support system (dss) dalam berbagai bidang (revolusi industri 4.0 menuju era society 5.0). Jambi: PT. Sonpedia Publishing Indonesia.
Sugiharto, S. (2023). Efektivitas lembaga penelitian dan pengabdian masyarakat (lppm) dalam meningkatkan produktivitas penelitian ilmiah dosen di institut ptiq Jakarta. Institut PTIQ Jakarta.
Sukarsa, S., & Sulaeman, D. A. (2024). Perancangan sistem pengolahan big data untuk analisis prediktif dalam bisnis dan industri. Jurnal Review Pendidikan Dan Pengajaran (JRPP), 7(3), 11891–11897.
Tampubolon, M. P. (2020). Change management: manajemen perubahan: individu, tim kerja, organisasi. Sleman: Mitra Wacana Media.
Winata, E. (2022). Manajemen sumberdaya manusia lingkungan kerja: tinjauan dari dimensi perilaku organisasi dan kinerja karyawan. Lombok: Penerbit P4I.
Yanto, W. (2023). Mempelajari pengoperasian dan perawatan mesin pengaduk (stirrer) pada pabrik pengolahan rubber smoke sheet (rss) di ptpn vii unit way berulu Kabupaten Pesawaran. Lampung: Politeknik Negeri Lampung.
Zulfikar, H., Saputra, D. R., Maulana, A., Cahyono, Y. A., & Sahara, S. (2023). Peningkatan efisiensi operasional pergudangan melalui teknologi canggih. Jurnal Ilmiah Wahana Pendidikan, 9(16), 393–402. https://doi.org/10.5281/zenodo.8242563
Downloads
Published
Issue
Section
License
Authors send the manuscript with the understanding that if accepted for publication, the copyright of the article belongs to the authors and retains publishing rights without restriction. More...
Mendeley 
Zotero 
Grammarly 
Spelling & Grammar 
Turnitin Plagiarism Checker 
