Pemanfaatan molase sebagai sumber karbon alternatif dalam pembuatan nata de coco

Authors

  • Budi Santosa Universitas Tribhuwana Tunggadewi Malang
  • Wirawan Wirawan Universitas Tribhuwana Tunggadewi Malang
  • Rikawanto Eko Muljawan Universitas Tribhuwana Tunggadewi Malang

DOI:

https://doi.org/10.35891/tp.v10i2.1641

Keywords:

carbon source,, molasses, nata de coco

Abstract

In the process, nata de coco is formed from the decomposition of carbon sources by Acetobacter xylinum by fermentation, converted into cellulose which was originally a thin membrane and then increasingly thickened forming nata pellicles. Making nata de coco has been utilizing carbon sources from sugar. The price of sugar in its development is increasingly expensive so it is necessary to find alternative carbon sources that are cheap one of which is molasses. The research aims to obtain the right concentration of molasses in producing high quality nata de coco. The research design used was a single complete Randomized Design (CRD), as a factor, namely the concentration of molasses consisting of 6 levels M1 = 1%, M2 = 1.5%, M3 = 2%, M4 = 2.5%, M5 = 3 %, M6 = 3.5%. The treatment was repeated 4 times so that the samples obtained were 24 samples. The results showed that molasses could be used as an alternative carbon source in making nata de coco. The concentration of molasses that produce quality nata de coco is 3% with a thickness of 1.98 cm, weight of 275 grams and crude fiber 2.95%. But the color of nata de coco produced is murky brown. Thus molasses can be used as a carbon source instead of sugar in the manufacture of nata de coco

Author Biographies

  • Budi Santosa, Universitas Tribhuwana Tunggadewi Malang

    Program Studi Teknologi Industri Pertanian, Fakultas Pertanian, Universitas Tribbuwana Tunggadewi Malang

  • Wirawan Wirawan, Universitas Tribhuwana Tunggadewi Malang

    Program Studi Teknologi Industri Pertanian, Fakultas Pertanian, Universitas Tribbuwana Tunggadewi Malang

  • Rikawanto Eko Muljawan, Universitas Tribhuwana Tunggadewi Malang

    Program Studi Teknologi Industri Pertanian, Fakultas Pertanian, Universitas Tribbuwana Tunggadewi Malang

References

Anas, A.K., Salma, A. & Nugroho, F. (2012). Pengaruh variasi massa umbi ganyong (Canna edulis) pada pembuatan dan karakterisasi plastik biodegradable ramah lingkungan berbahan dasar umbi ganyong. Prosiding Seminar Nasional Penelitian, Pendidikan dan Penerapan MIPA. Fakultas MIPA. Universitas Negeri Yogyakarta.

AOAC. (2002). Official methods of analysis of the association of official analytical chemists. Publisher by the Association of Official Analytical Chemists PO BOX 540 Benjamin Franklin Station Washington DC 20044.

Backdahl, H., Risberg, B., & Gatenholm, P. (2011). Observation on bacterial cellulose tube formation for application as vascular graft. Journal of Materials Science and Engineering, (C31), 14-21.

Barry, V., & Mc Cleary. (2014). Modification to AOAC official mehods 2009.01 and 2011.25 to allow for minor overestimation of low moleculer weight soluble dietary fiber in samples containing starch. Journal of AOAC International, 97(3), 896-901.

Bhantumnavin, W., Wanichapichart, P., Taweepreeda, W., Sirijarukula, S., & Paosawatyanyong, B. (2016). Surface modification of bacterial cellulose membrane by oxygen plasma treatment. Journal of Surface and Coatings Technology, (306), 272-278.

Chen, S., Zou, Y., Yan, Z., Shen, W., Shi, S., Zhang, X., & Wang, H. (2009). Carboxymethylated bacterial cellulose for copper and lead ion removal. Journal of Hazardous Materials, (161), 1355 – 1359.

Gayathry, G. (2015). Production of nata de coco a natural dietary fibre product from mature coconut water using Gluconacetobacter xylinum. International Journal Food Fermentation Technology, 5(2), 231-235.

Hanafiah, K.A. (2012). Rancangan percobaan (teori dan aplikasi). Jakarta. Rajawali Press.

Hidayat, N., Padaga, M.C., & Suhartini, S. (2006). Mikrobiologi industri. Yogyakarta. Penerbit Andi: 121 – 125.

Hirayama, K., Okitsu, T., Teramae, H., Kiriya, D., Onoe, H., & Takeuchi, S. (2013). Cellular building unit integrated with microstrand shaped bacterial cellulose. Journal of Biomaterials, (34), 2421 – 2427.

Iskandar, Z., Mulyati, M., Fathanah, S., Sari, I.U., & Juchairawati. (2010). Pembuatan film selulosa dari nata de pina. Jurnal Rekayasa Kimia dan Lingkungan, 7(3), 105-111.

Jiazhi, Y., Chenggang, Z., Xiaoli, L., Junwei, Y., Dongping, S., & Weihua, T. (2011). Preparation of high quality indium tin oxide film on a microbial cellulose membrane using radio frequency magnetron sputtering. Chinese Journal of Chemical Engineering, 19(2), 179-184.

Jung, H.I., Jeong, J.H., Lee, O.M., Park, G.T., Kim, K.K., Park, H.C., Lee, S.M., Kim, Y.G., & Son, H.J. (2010). Influence of glycerol on production and structural physical properties of cellulose from Acetobacter sp. V6 cultured in shake flasks. Journal of Bioresource Technology, (101), 3602-3608.

Kumalaningsih, S. (2012). Metodologi penelitian (kupas tuntas cara mencapai tujuan). Malang. UB Press: 92 – 100.

Kusmiati, Tamat, S.R., Nuswantara, S., & Isnaini, N. (2007). Produksi dan penetapan kadar β-glukandari tiga galur saccharomyces cerevisiae dalam media mengandung molase. Jurnal Ilmu Kefarmasian Indonesia, 1(5), 7-16.

Lin, W.C., Lien, C.C., Yeh, H.J., Yu, C.M., & Hsu, S.H. (2013). Bacterial cellulose and bacterial cellulose-chitosan membranes for wound dressing applications. Journal of Carbohydrat Polymers, (94), 603-611.

Martins, I.M.G., Magina, S.P., Oliveira, L., Freire, C.S.R., Silvestre, A.J.D., Neto, C.P., & Gandini, A. (2009). New biocomposites based on thermoplastic starch and bacterial cellulose. Journal of Composites Science and Technology (69), 2163-2168.

Nurhayati, N. (2006). Kajian pengaruh kadar gula dan lama fermentasi terhadap kualitas nata de soya. Jurnal Matematika, Sains dan Teknologi, 7(1), 40-47.

Pangesti, N.W.I., Pangastuti, A., & Retnaningtyas, E. (2012). Pengaruh penambahan molase pada produksi enzim xilanase oleh fungi aspergillus niger dengan substrat jerami padi. Jurnal Bioteknologi, 9(2), 41-48.

Pertiwi, A.A.P., Pardoyo, & Subagio, A. (2009). Pengaruh temperatur dan waktu karbonasi pada sintesis porous carbon berbahan dasar molase. Jurnal Kimia Sains dan Aplikasi, 3 (12), 93-97.

Pratomo, H., & Rohaeti, E. (2011). Bioplastik nata de cassava sebagai bahan edible film ramah lingkungan. Jurnal Penelitian Saintek, 16(2), 172-180.

Pomeranz & Meloan. (2004). Food analysis: teory and practice. The AVI Publishing.Co, Inc, Wesport. Connecticut: 30 – 43.

Rahayu, T., & Rahayu, T. (2007). Optimasi fermentasi cairan kopi dengan inokulan kultur kombucha (kombucha coffe). Jurnal Penelitian Sains dan Teknologi, 8(1), 15-28.

Santosa, B., Ahmadi, Kgs., & Taeque, D. (2012). Dextrin concentration and carboxy methyl cellulosa (cmc) in making of fiber-rich instant baverage from nata de coco. International Journal of Science and Technology, 1(1), 6-11.

Santosa, B., Tantalu, L., & Sugiarti, U. (2019). Penambahan ekstrak kulit buah naga pada pengembangan produk nata de coco berantioksidan. Jurnal Teknologi Pangan, 10(1), 1 – 8.

Shi, Q., Yang Sun, L.J., Zhang, H., Chen, L., Chen, B., Yang, H., & Wang, Z. (2012). The osteogenesis of bacterial cellulose scaffold loaded with bone morphogenetic. Journal of Biomaterials, (33), 6644-6649.

Sunagawa, N., Fujiwara, T., Yoda, T., Kawano, S., Satoh, Y., Yao, M., Tajima, K., & Dairi, T. (2013). Cellulose complementing factor (ccp) is a new member of the cellulose synthase complex (terminal complex) in acetobacter xylinum. Journal of Bioscience and Bioengineering, 115(6), 607-612.

Syamsu, K., Haditjaroko, L., Pradikta, G.I., & Rotiadi, H. (2014). Campuran pulp tandan kosong kelapa sawit dan selulosa mikrobial nata de cassava dalam pembuatan kertas. Jurnal Ilmu Pertanian Indonesia, 19(1), 14-21.

Downloads

Published

2019-09-29

Issue

Section

Article